ADURO P1 Manual

Hide thumbs Also See for P1:

Revision date: 22.01.2024

Adjustment of settings on Aduro pellet stoves

Difficulty level: Intermediate

NB: Any adjustment of the settings is on your own responsibility.

To adjust the settings on Aduro pellet stoves, you can use the stove's display or a remote control depending

on which type of stove you have. See below. Some settings can also be adjusted in the Aduro Pellet App.

Aduro P1 and P4 – Display on stove

A. Temperature setting (buttons 1 and 2)

B. Enter/SET (button 3)

C. Indicators for single components

D. Clock display

E. Room temperature display

Aduro P5 series – Remote control

1. Access the main menu by pressing the "SET" button (button 3) on P1/P4 and the "OK" button on

P5/P5 Lux.

F. Modes of operation

G. Current status information

H. ON/OFF and Exit (button 4)

I. Operation mode setting (buttons 5 and 6)

J. Remote control receiver

Table of Contents

Do you have a question about the P1 and is the answer not in the manual?

Page 1 To adjust the settings on Aduro pellet stoves, you can use the stove’s display or a remote control depending on which type of stove you have. See below. Some settings can also be adjusted in the Aduro Pellet App. Aduro P1 and P4 – Display on stove A.
Page 2 The display on the Aduro P1/P4 will show the menu number corresponding to the one shown in the excel sheet. The P5 remote control will also show this when entering a menu: Navigation in the menu is a little different based on the stove model: P1/P4: The buttons 5/6 are used to navigate through the different settings.
Page 3 Revision date: 22.01.2024 How to adjust the settings in the Aduro Pellet Stove App A limited number of settings are also adjustable in the service menu in the Aduro Pellet Stove App. Adjust the settings according to the excel sheet mentioned above.