Preparing To Install The Video Integration With Dmz Configurations - Cisco MeetingPlace Video Integration Administrator's Manual

Cisco systems meetingplace video integration administration guide
Table of Contents

Advertisement

Chapter 3
Installing Cisco MeetingPlace Video Integration
Parameter
Route Pattern/Hunt Pilot
Description
Cisco CallManager 4.0:
Cisco CallManager 4.1:
Provide Outside Dialtone
Other parameters.
Click Insert.
Step 4

Preparing to Install the Video Integration with DMZ Configurations

A DMZ is an area on the corporate network that is outside the corporate firewall. In order to allow
external participants to attend Cisco MeetingPlace conferences without compromising security, one or
more Cisco MeetingPlace Web Conferencing servers are deployed behind the firewall, and one or more
web-conferencing servers are deployed in a DMZ. These configurations are called "segmented meeting
access" (SMA) configurations; they are described fully in the Administrator's Guide for
Cisco MeetingPlace Web Conferencing Release 5.3.
Cisco MeetingPlace Video Integration must be installed on one and only one server on which
Cisco MeetingPlace Web Conferencing is installed:
Note
Use the information in this section to decide whether you will install
Step 1
Cisco MeetingPlace Video Integration behind the firewall or in the DMZ.
OL-6280-01
Gateway or Route/Hunt List
Gateway or Route List
If it is installed behind the firewall, only internal participants can attend video conferences.
If it is installed in the DMZ, external participants can also attend.
If Cisco MeetingPlace Video Integration is installed in the DMZ, meeting schedulers must allow
Internet access for all conferences that will include video, even if only internal participants will
attend. The web and video conferences will be held on the server in the DMZ.
If Cisco MeetingPlace Video Integration is installed behind the firewall in a DMZ configuration,
users cannot include video conferencing in a meeting that also includes web-conferencing
participants who are outside the firewall.
Additional caveats apply. See
Conferencing, page
4-12.
Value
The MeetingPlace service prefix you defined on
the Cisco IPVC MCU, followed by an
exclamation point (!).
The MeetingPlace Service on the
Cisco IPVC MCU, or a different name that
describes this route pattern.
The IP address or hostname of the H225 Trunk
(Gatekeeper Controlled) that you created.
Uncheck this check box.
Values as appropriate for your environment.
Important Information About DMZ Configurations and Video
Administrator's Guide for Cisco MeetingPlace Video Integration Release 5.3
Before You Install
3-17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Meetingplace video integration 5.3

Table of Contents