About Managing User Profiles For Video Use - Cisco MeetingPlace Video Integration Administrator's Manual

About Managing User Profiles for Video Use

Step 1 Use the information in this section to calculate the number of video overbook ports.
Enter the number of video overbook ports in the Video overbook ports field in MeetingTime: Click the
Step 2
Configure tab, then click Server Configuration, then scroll down in the panel on the right to Video
overbook ports.
About Managing User Profiles for Video Use
Use profile settings for users and groups to manage video-conferencing resources and simplify video
conferencing for users.
Users can be assigned to groups to simplify assigning privileges and parameters. Enter settings in the
MeetingTime application using the table in this section
Manage the use of video resources by doing the following:
•
•
By default, video conferencing is not enabled in user profiles, and video endpoint bandwidth is set to the
maximum, 384 kbps.
Table 4-4
Table 4-4
Item
Allow Video Scheduling?
Endpoint Bandwidth
This value is the default bandwidth
for the group to which a user has
been assigned.
For more information about
bandwidth use, see
Video-Conferencing Bandwidth,
page
Administrator's Guide for Cisco MeetingPlace Video Integration Release 5.3
4-10
Controlling which users and groups can schedule video conferences. There are no restrictions on
attending video conferences.
Prioritizing bandwidth use by assigning profiled users and groups default bandwidths.
shows settings for groups;
Available Settings For Each Group
About
4-12.
Chapter 4 Configuring and Managing Cisco MeetingPlace Video Integration
Table 4-5 shows settings for individual profiled users.
Values Where to Configure in MeetingTime
No In the specific User Group profile, in
the Restrictions section.
Yes
128K In the specific User Group profile, in
the Video Meetings section.
256K
384K (Default)
OL-6280-01