Cisco MeetingPlace Video Integration Administrator's Manual page 28

Before You Install
The Cisco MeetingPlace service prefixes appear automatically on the IP/VC Administrator Services
Note
page for new Cisco IPVC MCUs. However, these services do not appear when you upgrade your
Cisco IPVC MCU to Release 3.5.24. To display these services, you must use the restore factory defaults
option. In doing so, you will lose your current configuration.
To install the Cisco MeetingPlace service templates on an existing Cisco IPVC MCU installation and
erase existing services:
Step 1 Run the Cisco IPVC MCU installer.
At the first install screen, click Customize.
Step 2
Check the MCU Config File check box.
Step 3
Continue with the installation.
Step 4
After installation, log in to the Cisco IPVC MCU as administrator.
Step 5
Click MCU on the sidebar and click the Services tab.
Step 6
In the Services tab, choose the appropriate template for your needs. Voice Activated allows participants
Step 7
to View Active Speaker, while Continuous Presence allows participants to View Multiple People. These
settings are available to participants in the web-conferencing meeting room:
Service Prefix
887
888
889
Review the remaining topics in
Step 8
and make additional configurations as required for your needs.
Creating a Service Manually
To create a Cisco IPVC MCU service for Cisco MeetingPlace, do the following tasks:
•
•
•
•
•
Administrator's Guide for Cisco MeetingPlace Video Integration Release 5.3
3-6
Supported Views
Voice Activated and
Continuous Presence
Voice Activated
Voice Activated and
Continuous Presence
Setting the Core Service Parameters, page 3-7
Setting Audio Indications, page 3-7
Making Sure that a Conference Password Is Not Required, page 3-8
Setting Conference View Parameters, page 3-8
Setting Video Schemes Parameters, page 3-10
Chapter 3
Supported
Endpoints
H.323
SCCP,
H.323
SCCP,
H.323
About Configuring the Cisco IPVC MCU to Use Cisco MeetingPlace
Installing Cisco MeetingPlace Video Integration
Processors Allow Dynamic
Required Format Scheme
MP H.261 Unchecked
MP H.263 Checked
MP and H.263 Checked for both
EMP views
OL-6280-01