Advantech EPC-U3233 User Manual page 6

Technical Support and Assistance 技術支援與服務
1. Visit the Advantech web site at www.advantech.com/support where you can
find the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer
service center for technical support if you need additional assistance.
Please have the following information ready before you call:
– Product name and serial number
– Description of your peripheral attachments
– Description of your software (operating system, version, application
software, etc.)
– A complete description of the problem
1.
有關該產品的最新資訊，請訪問研華公司的網
站： https://www.advantech.com/support
2.
用戶若需技術支援，請與當地分銷商、銷售代表或研華客服中心聯繫。進行
技術諮詢前，使用者須將下面各項產品資訊收集完整：
–
產品名稱及序號
–
週邊附加設備的描述
–
使用者軟體的描述 （作業系統、版本、應用軟體等）
–
產品所出現問題的完整描述
–
每條錯誤資訊的完整內容
Safety Instructions 安全指示
1. Please read these safety instructions carefully.
2. Please keep this User's Manual for later reference.
3. Please disconnect this equipment from AC outlet before cleaning. Use a damp
cloth. Don't use liquid or sprayed detergent for cleaning. Use moisture
sheet or clothe for cleaning.
4. For pluggable equipment, the socket-outlet shall near the equipment and
shall be easily accessible.
5. Please keep this equipment from humidity.
6. Lay this equipment on a reliable surface when install. A drop or fall could
cause injury.
7. The openings on the enclosure are for air convection hence protecting the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source when connecting the equipment to
the power outlet.
9. Ensure to connect the power cord to a socket-outlet with earthling
connection
10. Place the power cord such a way that people cannot step on it. Do not
place anything over the power cord.
11. All cautions and warnings on the equipment should be noted.
12. If the equipment is not used for long time, disconnect the equipment from
mains to avoid being damaged by transient over-voltage.
13. Never pour any liquid into ventilation openings; this could cause fire or
electrical shock.
14. Never open the equipment. For safety reasons, only qualified service
personnel should open the equipment.
15. Before any internal installation procedures are carried out on the system,
make sure the system is turned off and cooled down for 15 minutes. Failing
to run off the system before opening it can cause permanent damage to the
system and serious or fatal injury to the user.
6