Thermo King T-500R Maintenance Manual page 89

If enabled, the Language Menu is the first menu item to appear as shown in Figure below. Press the SELECT key to
choose the Language menu.
The Language menu will appear as shown in Figure . Press the + or - keys to select the desired language. When the desired
language is shown press the YES key to confirm the choice.
The display will briefly show PROGRAMMING LANGUAGE - PLEASE WAIT in the new language as shown.
The new language is confirmed, and then the Premium Display will appear in the new language as shown. The unit is ready
to run.
Repeat the process to select a different language. To select a different Main Menu item press the NEXT key. To return to the
Premium Display press the EXIT key.
IMPORTANT: If necessary, English and all other languages in the installed HMI Control Panel software revision may be accessed from
the Premium Display.
Should it be necessary to change to another language at any time, return to the Premium Display and then press and hold the
first and last soft keys for 5 seconds as shown. The Premium Display above is shown in Deutsch (German).
After 5 seconds the Language Menu will appear in the current language as shown. Press the + or - keys to select the desired
language. When the desired language is shown press the YES key to confirm the choice. Note that all languages in the installed
HMI Control Panel software (65xx, 66xx or 67xx) can be selected using this method.
Select Key
+ or - Keys, Yes Key
New Language
Premium Display in New Language
Language Menu
Operating Instructions Premium HMI 6-17