Thermo King T-500R Maintenance Manual page 119

6. Open WinTrac 4.8.1 or later. Earlier versions
7. Select Seek Device.
8. Use WinTrac to set the time and date. See the WinTrac Manual for additional information.
9. When the time and date is set and checked, disconnected the cable, replace the back cover and reinstall the
Standard Truck HMI Control Panel as necessary.
10.Turn the unit on and perform a ServiceWatch Data Logger download using WinTrac to verify the time and date
are correct.
Red LED Indicator
of WinTrac will not work.
Operating Instructions Standard HMI 7-17