1.
Roller Bearing, Pack with Mobil
Catalog) grease
2.
Pack These Areas with Mobil
Catalog) grease at Assembly
3.
HEX HD Cap Screw (6X), 1-4/28 UNF X 1.75
Long. Torque to 110 ± 5 in-lbs (12.5 ±.6 N•m)
NOTE: Shoes must be disengaged while
tightening 6 bolts and MUST be held tightly
against hub while nuts are tightened.
4.
Bearing, Fill with Mobil
grease Approximately 0.32 oz (70 to 80% full)
5.
3/8-16 UNC x 1.00 Long, Flat Head Socket Cap
Screw with Nylox Insert / Apply Loctite (see
Tool Catalog) and Torque to 30 to 35 fT-lb
(41 to 48 N•m)
6.
Serial Nameplate
Clutch
Clutch Maintenance
TM
(see Tool
TM
(see Tool
TM
(see Tool Catalog)
11-7