Kärcher 1.783-000.0 Manual page 16

Yearly
Have the prescribed safety inspection
*
carried out by an electrician.
Maintenance Works
Replace the vacuum bar.
Note:
The vacuum bars are attached to the appli-
ance with snaps and can simply be pulled
off.
Move the suction bar lift pedal to posi-
*
tion suction off (Fig. 3 - position "1/
ON", see inside front cover).
Remove the fresh water reservoir.
*
Remove the waste water tank.
*
Lay the device on the reverse.
*
Pull off the vacuum bar downwards.
*
Insert the new vacuum bars and lock
*
them into place.
Replacing the brush roller
Remove the fresh water reservoir.
*
Remove the waste water tank.
*
Lay the device on the reverse.
*
Press the release button for the brush
*
roller and swivel the brush roller toward
the bottom and pull it off the driver.
Place the new brush roller on the driver
*
and lock into place on the opposite side.
Frost protection
In case of danger of frost:
Empty the fresh and dirt water reser-
*
voirs.
Store the appliance in a frost-protected
*
room.
16 EN 5