Download Print this page

Haier AD88NAHAAA Operation And Instruction Manual page 11

Duct type air conditioner
Hide thumbs

Advertisement

Table of Contents
OPERATION
AUTO RUN, COOL,HEAT and DRY operation
Recommendations
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display
(Not Timer setting). Power indicator lights up.
(2) Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
AUTO COOL
Unit will run in operation mode displayed on LCD.
Stop display at your desired mode.
(3) Select temp. setting
Press TEMP button
Every time the button is pressed, temp. setting
increases 1 C.
If button is kept depressed, temp.setting will
increase quickly.
Every time the button is pressed, temp. setting
decreases 1 C.
If button is kept depressed, temp. setting will
decrease quickly.
Unit will start running to reach the temp. setting
on LCD.
Use COOL in summer.
Use HEAT in winter.
Use DRY in spring,autumn and in damp climate.
DRY
HEAT
FAN
MODE
AUTO
2
CLOCK
SET
TIMER
AM
ON/OFF
(4) Fan speed selection
Press FAN button. For each press, fan speed changes
as follows:
LOW
Unit runs at the speed displayed on LCD.
In HEAT mode, warm air will blow out after a short
period of time due to cold-draft prevention function.
In DRY mode, when room temp. becomes 2 C
higher than temp. setting, unit will run intermittently
at LOW speed regardless of FAN setting.
(5) Unit stop
Press ON/OFF button.
Only time and room temp remains on LCD.
All indicators go out.
Vertical flap closes automatically.
Hints
Wire controller can memorize each operation
status. When starting it next time, just press
ON/OFF button and unit will run in previous
status.
10
FAN
SWING
TEMP
4
******
SET
3
******
SLEEP
*****
FILTER RESET
P9*11*12*
RESET
13***
5
1
MID
HIGH
AUTO
AUTO

Advertisement

Table of Contents
loading

  Related Manuals for Haier AD88NAHAAA

This manual is also suitable for:

Au88nataaaHdu-88h03/hHdu-88h03