Proxxon LWB/E Manual page 16

Every device is dirtied by dust when working.
Cleaning is therefore essential. To ensure a
long service life, however, the machine should
be cleaned with a soft cloth or brush after
each use.
Mild soap or other suitable cleaning agent
may be used in this context. Solvents or
cleaning agents containing alcohol (e.g.
petrol, cleaning alcohols, etc.) should be
avoided, since these can attack plastic cas-
ings.
The apertures required for cooling the motor
must always be kept free of dust and dirt.
Accessories
For more detailed information on accessories,
please request our device catalogue from the
address specified on the last page in the war-
ranty information.
Please note in general:
Proxxon bits and cutters have been designed
to work with our machines, which makes them
optimal for their use.
We will not assume any liability whatsoever for
the safe and proper function of our devices
when using third-party bits and cutters!
Service note
Please note: The mains power input may only
be replaced by our Proxxon Service Depart-
ment or a qualified specialist!
Disposal:
Please do not dispose of the device in do-
mestic waste! The device contains valuable
substances that can be recycled. If you have
any questions about this, please contact your
local waste management enterprise or other
corresponding municipal facilities.
- 16 -
Note: EC Declaration of Conformity
Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation:
Article No.:
In sole responsibility, we declare that this
product conforms to the following directives
and normative documents:
EU EMC Directive 2014/30/EC
•
DIN EN 55014-1 / 09.2016
DIN EN 55014-2 / 01.2016
DIN EN 61000-3-2 / 03.2015
DIN EN 61000-3-3 / 03.2014
• EU Machinery Directive 2006/42/EC
DIN EN 60745-1 / 01.2010
DIN EN 60745-2-23 / 11.2013
Date: 11.07.2017
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identi-
cal with the signatory.
LWB/E
28492