Page 3
Do not use accessories which are not specifically designed and recommend- Proxxon assumes no liability for the safe func- ed by the tool manufacturer. Just be- tion of the device in the case of:...
Page 4
cracks, sanding drum for cracks, tear hand(s) to control the tool. Round mate- or excess wear, wire brush for loose or rial such as dowel rods, pipes or tubing cracked wires. If power tool or acces- have a tendency to roll while being cut, sory is dropped, inspect for damage or and may cause the bit to bind or jump to- install an undamaged accessory.
Page 5
ry which in turn causes the uncontrolled tary file, high-speed cutter or tungsten car- power tool to be forced in the direction oppo- bide cutter grabs, it may jump from the site of the accessory’s rotation. groove and you could lose control of the tool.
Page 6
The LWB/E is powered by a quiet direct current motor for a long service life and great- est reliability. The supplied collets can clamp Safety warnings specific for wire brushing the shafts of the bits and cutters up to max.
Proxxon bits and cutters. When using • Prevent unintentional starting. Ensure the switch is in the off-position before connect- third-party brands we cannot guarantee com-...
Page 8
DIN EN 60745-1 / 01.2010 DIN EN 60745-2-23 / 11.2013 Please note in general: Proxxon bits and cutters have been designed Date: 11.07.2017 to work with our machines, which makes them optimal for their use. We will not assume any liability whatsoever for...
Page 9
Spare Parts List PROXXON LWB/E Description ET-Nr. - 84 -...
Page 11
Service note All PROXXON products are thoroughly inspected after production. Should a defect occur nevertheless, please contact the dealer from whom you purchased the product. Only the dealer is responsible for handling all legal warranty claims which refer exclusively to material and manufacturer error.
Need help?
Do you have a question about the LWB/E and is the answer not in the manual?
Questions and answers