Sea Ray 58 Sedan Bridge Owner's Manual page 89

S
ECTION
16. S & S
EACOCKS
Seacocks and strainers provide cooling water to
the engines, generator and A/C units located
throughout the bilge area.
To open the seacock, turn the handle in line with
water flow (vertically). To close, turn the handle
against water flow (horizontally). The strainers
should be inspected frequently and cleaned out
when plugged. If operation of the air conditioning is
excessive it is important that the A/C unit strainers
are inspected more frequently than other strainers.
! CAUTION
As a safety measure, close all seacocks when
leaving boat for any length of time to impede water
ingress in the event of water hose failure.
The seacock body should be inspected and
lubricated annually.
T C S
O LEAN THE TRAINER
• Close the seacock by turning the handle
against water flow direction (horizontally).
NOTE: Some seacocks are equipped with
locking tee handles which must be loosened
before operating the handle
• Loosen strainer cap with the adjustable spanner
wrench provided. It is stowed on the forward
component board in the bilge.
S M
TRAINER AINTENANCE
(F . 4.13.1)
IG
58 Sedan Bridge (585 Sedan Bridge)
4 • B
ILGE
TRAINERS
ADJUSTABLE
SPANNER
WRENCH
(SUPPLIED)
https://www.boat-manuals.com/
& U
NDERWATER
• Rotate strainer cap clear of strainer housing.
Pull upward on stainless steel screen basket
handle.
S M
TRAINER AINTENANCE
(F . 4.13.2)
IG
S & S
EACOCK TRAINER
(F . 4.13.3)
IG
O-RING
HANDLE
(UP - OPEN
POSITION)
HANDLE
(HORIZONTAL-
CLOSED POSITION)
G
EAR
CAP
STAINLESS STEEL
SCREEN
STRAINER
SEACOCK
4.13