Page 1
® Model AG11/AG13 Pull Type Scraper Service and Parts Manual LANDOLL CORPORATION 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM F-879-1219 12/2019 - Present...
Page 2
Manuals for the AG11-13 Scraper MANUAL NUMBER MANUAL NAME F-879 AG11-13 Service and Parts Manual F-879-1219...
Introduction and Safety Information Introduction The Landoll /Icon Model AG11/AG13 Scraper is a quality product designed to give years of trouble free performance. By following each section of this manual, your system will perform as designed for you and your operation.
(decals) before you attempt to operate or maintain this vehicle. vehicle. 3. Carry reflectors or flags to mark the tractor and The safety statements contained in this manual relate to implement in case of breakdown on the road. the operation of the Landoll/Icon Scraper. F-879-1219...
INDEX TABLE OF CONTENTS INTRODUCTION AND SAFETY INFORMATION Protective Equipment 4. Do not transport at speeds over 20 MPH under good conditions. Never travel at a speed which does not 1. Wear protective clothing and equipment. allow adequate control of steering and stopping. Reduce speed if towed load is not equipped with 2.
TABLE OF CONTENTS INDEX INTRODUCTION AND SAFETY INFORMATION Safety Chain 1. Use a chain with a strength rating equal to or greater than the gross weight of towed machinery, which is 10,100 pounds minimum in accordance with ASAE S338.2 specifications. If two or more implements are pulled in tandem, a larger chain may be required.
INDEX TABLE OF CONTENTS STANDARD SPECIFICATIONS General Torque Specifications (rev. 4/97) TORQUE SPECIFIED IN FOOT POUNDS - This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing. Assembly torques apply to plated nuts and capscrews assembled without supplemental lubrication (as received condition).
TABLE OF CONTENTS INDEX STANDARD SPECIFICATIONS Hydraulic Fitting Torque Specifications TORQUE IS SPECIFIED IN FOOT POUNDS- 37 JIC, ORS, & ORB (REV. 10/97) This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing.
10 days of purchase or lease, in to be able to follow the suggestions made. Please take order to be on file at Landoll and eligible for Warranty. time to understand the proper maintenance schedule and Take time to read and understand the Warranty for this SAFE operation of your equipment.
Page 14
TABLE OF CONTENTS INDEX STANDARD SPECIFICATIONS Figure 2-2: Product Warranty F-879-1219...
Chapter 3 INDEX TABLE OF CONTENTS Assembly and Lubrication Assembly and Lubrication Check Lubrication Maintenance List Table 3-1 specifies the number and the period of lubrication points on the AG11/AG13 Scraper. Proper 1. Install Cutting Bits, and Side Router Bits. Torque all maintenance of your machine will, under normal mounting bolts.
Page 16
TABLE OF CONTENTS INDEX ASSEMBLY AND LUBRICATION DETAIL A DETAIL A Figure 3-1: Lubrication Schedule LUBRICATION TABLE NO. OF LUBE ITEM DESCRIPTION POINTS INTERVAL SWIVEL HITCH DAILY DOLLY HITCH & CROSS PIVOT DAILY FRONT WHEEL HUBS WEEKLY LIFT CYLINDER PINS DAILY GATE PIVOT &...
Chapter 4 INDEX TABLE OF CONTENTS Hookup and Operation Description of Machine Hose Wrap Designations Color coded hose wraps are attached at the tip end of the The AG11/AG13 utilizes 2 hydraulic valves on the tractor, hoses to identify the 2 pairs of hydraulic lines to the allowing it to function in 3 different directions.
HOOKUP AND OPERATION Tractor Preparation Attaching to the Tractor The Landoll/Icon AG11/13 is designed to be pulled by a tractor equipped with a double lip or clevis type hitch. If 1. Align the tractor drawbar with the machine. Raise or...
Page 19
INDEX TABLE OF CONTENTS HOOKUP AND OPERATION 2. Always fully extend lift cylinder before removing WARNING transport lockout. Unit can settle during transportation causing the transport lockout to be Escaping hydraulic fluid can cause serious pinched. personnel injury. Relieve system pressure before repairing, adjusting, or disconnecting.
TABLE OF CONTENTS INDEX HOOKUP AND OPERATION Hydraulic Gate & Push-Off Wall General Operation System 1. The horsepower requirements are typically 250-400 horsepower. This will vary widely due to speed, depth The hydraulic system will be filled with oil and fully of cut, moisture and types of soils.
INDEX TABLE OF CONTENTS HOOKUP AND OPERATION On a 2-valve system, the timing of the loaded machine is critical to its performance. It is important that the gate and push off wall work as they should. Adjustments to the timing is made at the sequence block, located on the tongue of the machine.
Seal kits are available from your Wheel Bearing Maintenance Landoll dealer. Wheel bearing maintenance should be performed at the 3. Check all hydraulic hoses weekly. Look for binding or beginning of every season of use.
Page 23
INDEX TABLE OF CONTENTS HOOKUP AND OPERATION 8. Know the transport heights and widths of the unit CAUTION before transporting. Attachments such as leveling harrows can increase the transport dimensions of the Excessive speed may result in loss of control of implement.
Page 24
TABLE OF CONTENTS INDEX HOOKUP AND OPERATION Table provided for general use. NOTES: F-879-1219...
Chapter 5 INDEX TABLE OF CONTENTS Illustrated Parts List General Assembly Figure 5-1: General Assembly General Assembly ITEM PART NO. DESCRIPTION QTY. 5-2 - 5-18 GRADER ASSEMBLY 5-20 - 5-25 HYDRAULICS 5-27 - 5-29 ELECTRICAL 5-30 - 5-33 DECALS...
Page 26
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST Scraper Assembly Figure 5-2: Hitch Assembly F-879-1219...
Page 27
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Hitch Assembly ITEM PART NO. DESCRIPTION QTY. 4001548 HITCH, PINTLE CAST, CAT IV HD 172581 SCREW HEX CAP 1-8UNCX9.5 GR8 1-654-010125-22 SCREW HX CP 1-8UNCX8-1/2G8ZP 622-3511-010 WASHER, FLAT 1" MIL-CARB SAE 1-861-010032-24 WASHER FL 1IN NARROW ZP 141434 SAFETY CHAIN 21,000LB 118652...
Page 28
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST Figure 5-3: Dolly Assembly F-879-1219...
Page 29
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Dolly Assembly ITEM PART NO. DESCRIPTION QTY. 4001455 BUSHING, LARGE FLANGED 640591 4001271 BUSHING 4 OD-3.5 ID SM.FLANGED ICO2253 DOLLY HITCH 10YD PIVOT ICO2254 10YD WEAR WASHER ICO2255 10YD HITCH RETAINER 172892 NUT HX SLOT 2-1/2-4 ZP 5000 ZERK FITTING 1/8NPT 4000591...
Page 30
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST 14 22 Figure 5-4: Push-Off Wall Assembly F-879-1219...
Page 31
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Push-Off Assembly ITEM PART NO. DESCRIPTION QTY. ICO2230 10YD PUSH-OFF WALL ICO2229 10YD PUSH OFF FRAME ICO2232 10YD PO SUPPORT ICO2228 10YD PUSH OFF LINKAGE (INCLUDES ITEM 5) 4001414 BUSHING, 175150150 PLASTIC ICO2045 821 PIN 1 1/2 x 4 1/4 CHROME 1-654-010055-09 SCREW,HX CP,1/2-13UNCX3 GR5...
Page 32
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST Figure 5-5: Main Frame Assembly F-879-1219...
Page 33
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Main Frame Assembly ITEM PART NO. DESCRIPTION QTY. ----- 11 YD AG SCRAPER ----- 13 YD AG SCRAPER ICO2227 10YD MAIN FRAME 184072 WLDMT, 13YD MAIN FRAME (NOT SHOWN) ----- PUSH-OFF WALL ASSEMBLY (SEE PAGE 5-7) ICO2233 10YD GATE 184073...
Page 34
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST DETAIL A DETAIL A Figure 5-6: Hitch, Dolly and Component Assembly to Main Frame 5-10 F-879-1219...
Page 35
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Hitch, Dolly and Component Assembly to Main Frame ITEM PART NO. DESCRIPTION QTY. ----- HITCH & DOLLY ASSEMBLY (SEE PAGE 5-3) AND (SEE PAGE 5-5) ----- MAIN FRAME ASSEMBLY (SEE PAGE 5-9) 4000902 BUSHING, 300251200 ICO2258 10YD PIN 13 5/8...
Page 36
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST 24 7 Figure 5-7: Main Frame Assembly Rear 5-12 F-879-1219...
Page 37
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Main Frame Assembly Rear ITEM PART NO. DESCRIPTION QTY. 4000902 BUSHING, 300251200 HYD CYL, 4-1/2 X 32 YELLOW 4001542 (SEE PAGE 5-25) ICO0218 PIN WLDMT 2-1/2X5-3/4 19C 18D 5001151 HYF - 1/8MP-1/8FP 5000 ZERK FITTING 1/8NPT ICO1118 PIN SPACER, ø.780"...
Page 38
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST Figure 5-8: Hub & Spindle Assembly 178723 5-14 F-879-1219...
Page 39
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Hub & Spindle Assembly 178723 ITEM PART NO. DESCRIPTION QTY. 178723 HUB AND SPINDLE ASSY 12,000 LB (INCLUDES ITEMS 2-5, 10) 178722 SPINDLE 12,000 LB W/HOLE 110-4224 PIN,COTTER-3/16 X 2IN LG 225598 SPINDLE WASHER, 1-1/4” 225599 NUT, HEX SLOT 1-1/4-12UNF 225591...
Page 40
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST Figure 5-9: Hub & Spindle Assembly 178721 5-16 F-879-1219...
Page 41
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Hub & Spindle Assembly 178721 ITEM PART NO. DESCRIPTION QTY. 178721 HUB AND SPINDLE ASSY 20,000 LB (INCLUDES ITEMS 2-5, 10) 178720 SPINDLE 20,000 LB W/HOLE 172810 PIN, COTTER 5/16 X 3-1/2 225589 SPINDLE WASHER, 2”...
Page 42
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST Figure 5-10: 7,000 Lb. Sidewind Jack Assembly 7,000 Lb. Sidewind Jack Assembly ITEM PART NO. DESCRIPTION QTY. 140647 JACK, SIDEWIND 7000LB 500171 HANDLE FOR JACK 141250 TUBE, RD, JACK MOUNT (WELD TO IMPLEMENT FRAME) 142194 5/8"...
Page 43
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Table provided for general use. NOTES: 5-19...
Page 44
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST Hydraulics ITEM HOSE ROUTING 12 RED TRACTOR TO PORT B , EXTEND 12 BLUE TRACTOR TO PORT A , RETRACT TRACTOR TO BASE END LIFT CYL, EXTEND 13 GREEN 13 BLACK TRACTOR TO ROD END LIFT CYL, RETRACT 16 (D) PORT E TO TEE TO ROD END GATE CYLS, RETRACT 14 YELLOW...
Page 45
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Hydraulic Assembly ITEM PART NO. DESCRIPTION QTY. 4001452 ASSY, HYD SEQUENCE VALVE BLOCK 4001236 HYDCYL - 6X22W 37 1/4" W/BUSHI (SEE PAGE 5-23) 4001543 HYD CYL, 3-1/2 X 20 YELLOW (SEE PAGE 5-24) 4001542 HYD CYL, 4-1/2 X 32 YELLOW (SEE PAGE 5-25) 163513...
Page 46
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST NOTE: RUN HOSES THROUGH HOSE BRACKET ITEM HOSE ROUTING 12 RED TRACTOR TO PORT B , EXTEND 12 BLUE TRACTOR TO PORT A , RETRACT 13 GREEN TRACTOR TO BASE END LIFT CYL, EXTEND 13 BLACK TRACTOR TO ROD END LIFT CYL, RETRACT 14 YELLOW...
Page 47
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Figure 5-13: Cylinder Assembly - 6 X 22 Cylinder Assembly 6 X 22 ITEM PART NO. DESCRIPTION QTY. 4001236 HYDCYL - 6X22W 37 1/4" W/BUSHI ----- CASE WELDMENT ----- PISTON ROD ----- NUT LOCK 2-12 FULL COLLAR ----- HEAD GLAND -----...
Page 48
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST Figure 5-14: Cylinder Assembly - 3-1/2 X 20 Cylinder Assembly 3-1/2 X 20 ITEM PART NO. DESCRIPTION QTY. HYD CYL, 3-1/2 X 20 YELLOW 4001543 ----- CASE WELDMENT ----- PISTON ROD ----- NUT LOCK 1- 4 AUTO ----- HEAD GLAND -----...
Page 49
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Figure 5-15: Cylinder Assembly - 4-1/2 X 32 Cylinder Assembly 4-1/2 X 32 ITEM PART NO. DESCRIPTION QTY. HYD CYL, 4-1/2 X 32 YELLOW 4001542 ----- CASE WELDMENT ----- PISTON ROD ----- NUT LOCK 1 1/4-12UNF ----- HEAD GLAND -----...
Page 50
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST Table provided for general use. NOTES: 5-26 F-879-1219...
Page 51
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Electrical 7-PIN 4-PIN 2-PIN CIRCUIT CONNECTOR TOWER TOWER GROUND – – WORK LAMPS LEFT FLASHING & – TURN – – STOP LAMPS RIGHT FLASHING – & TURN – TAIL LAMPS SWITCHED – POWER (12 V) MAIN WARNING LIGHT HARNESS - WIRING CHART 2-PIN 3-PIN...
Page 52
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST NOTE: REAR HARNESS ROUTES THROUGH MAIN FRAME TUBE FRONT OF MACHINE NOTE: FRONT HARNESS ROUTES THROUGH MAIN FRAME TUBE Figure 5-17: Electrical Assembly W/ LED Lights 5-28 F-879-1219...
Page 53
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Electrical Assembly W/ LED Lights (After 6-1-2016) ITEM PART NO. DESCRIPTION QTY. 200340 KIT 50' X 4' LED LIGHTS 174435 LAMP, AG RED SINGLE LED 174436 LAMP, AG AMBER SINGLE LED 174437 MODULE, AG FLASHER CONTROL 200348 REAR HARNESS, WARN LIGHT, 4' 200345...
Page 54
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST Decals Marysville Kansas www.landoll.com MODEL SERIAL MADE IN USA 1-573-010006 Figure 5-18: Decals (1 of 2) 5-30 F-879-1219...
Page 55
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Figure 5-19: Decals (2 of 2) 5-31...
Page 56
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST DETAIL A DETAIL A Figure 5-20: Decal Location 5-32 F-879-1219...
Page 57
INDEX TABLE OF CONTENTS ILLUSTRATED PARTS LIST Decals ITEM PART NO. DESCRIPTION QTY. 2000638 KIT, AG-11 DECAL 184087 KIT, AG-13 DECAL 4000949 DECAL HYD HOSE COLOR CODE 4001516 DECAL-OFF ROAD ONLY 4001484 DECAL "ALWAYS CONTACT UTILITIE 4001446 DECAL "WARNING-REMOVE CYL.STOP 4000938 DECAL "GREASE DAILY"...
Page 58
TABLE OF CONTENTS INDEX ILLUSTRATED PARTS LIST NOTES: 5-34 F-879-1219...
Page 59
Chapter 6 TABLE OF CONTENTS Index Index Numerics 1-654-010047-07 ......5-13 1-654-010047-08 ......5-13 0011042 .
Page 60
TABLE OF CONTENTS INDEX INDEX 184087 ....... . 5-33 225593 ....... . 5-15 184092 .
Page 61
INDEX TABLE OF CONTENTS INDEX 4001455 ....... . 5-5 622-3511-007 ......5-9 4001484 .
Page 62
TABLE OF CONTENTS INDEX INDEX ICO2248 ....... . 5-9 ICO2249 ....... . 5-9 ICO2250 .
Page 63
Document Control Revision Log Date Form # Improvement(s): Description and Comments 01/21/2013 F-879 Initial Release 01/22/2018 F-879-0118 Updated front & rear cover, safety section 12/30/2019 F-879-1219 Updated all manual with new FrameMaker format...
Page 64
Equipment from Landoll Corporation is built to exacting standards ensured by ISO 9001 registration at all Landoll manufacturing facilities. Model AG11/AG13 Pull Type Scraper Service and Parts Manual Re-Order Part Number F-879-1219 LANDOLL CORPORATION 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM...