Maintenance Schedule; Maintenance; First Engine Oil Change - Kärcher Tornado KSM 750 B Honda User Instructions

KSM 750 B Honda

MAINTENANCE

First engine oil change

Maintenance schedule

Fault
Unit does not start up
Engine is running, but unit does
not move
Unit does not sweep properly
Unit blows out dust
User Instructions
!
Caution!
Abrasion causes an increased amount of deposits within a
new engine. In order to avoid any damage to the engine, we
recommend that you change the engine oil for the first time
after 5 operating hours (See chapter "Technical Data").
Possible cause
Main cover not closed
(Cover switch)
Fuel tank empty
Worn out or defective spark plug Replace spark plug
Incorrectly adjusted Bowden
cable
Torn belt
Oil or grease on belt
Wear on sweeping roller
Loose belt
Blocked filter
Worn out or damaged sealing
strips
Damaged seal on debris
container
Remedy
Close cover
Fill up with petrol
(Customer Service)
Adjust Bowden cable
Replace belt
(Customer Service)
Remove oil or grease
(Customer Service)
Readjust sweeping roller if worn
Replace when bristles are
reduced to 70 mm
Replace belt
(Customer Service)
Clean filter
Replace sealing strips
Replace seal on debris container
(Customer Service)
English
9