Prior To Initial Start-Up - Kärcher Tornado KSM 750 B Honda User Instructions

English
PRIOR TO INITIAL START-
UP
6
User Instructions
Note: If you discover any transport damage while unpacking the
unit, inform your dealer immediately.
Removing the packaging
The machine has been secured to a pallet to keep it safe
during transport. Unpack the unit as follows:
Cut plastic band.
Remove chocks from under wheels, and drive unit down a
ramp and off pallet, or
lift unit by hand over chocks and off pallet.
Attaching the outrigger broom
In order to avoid any damage while the unit is in transit, it is
supplied without the outrigger broom attached. Assembly is
straightforward:
Push outrigger broom onto drive pin.
Attach hexagonal nut (SW 13), and tighten.
Mount push handle
Straighten up fold-down push handle and screw it into
position with the star knobs on left and right.
Filling the fuel tank
Fill up with "Standard petrol, unleaded".
Capacity – see "Technical specifications".
Initial driving trials
Carry out initial driving trials in an area with plenty of free
space until you are familiar with the individual operating
controls and their functions.
KSM 750 B Honda