Checking The Engine Oil Level; Cleaning The Air Cleaner; Replacing The Sweeping Roller; Replacing The Outrigger Broom - Kärcher Tornado KSM 750 B Honda User Instructions

English
Checking the engine oil
level

Cleaning the air cleaner

Replacing the sweeping
roller
Replacing the outrigger
broom
10
User Instructions
Park sweeper on a horizontal surface.
Take out dipstick and check it.
The oil level must lie between the "min" and "max" marks.
If the oil level lies below "min" - top up with oil.
If the oil level lies above "max" - siphon off oil (through the
dipstick opening).
Screw dipstick into place.
Oil type
Suction pump for use
when changing the oil
Open cover on engine.
Remove cleaner insert.
Clean plastic insert,
– wash plastic insert in a soapy solution (e.g. water with a
little washing-up liquid), and rinse in clean water
– allow insert to dry, and then spray lightly with engine oil
– squeeze out any excess oil.
Refit cleaner components, and fasten cover.
Stop unit, and switch engine OFF.
Remove debris container.
Remove right and left securing bolts, and detach sweeping
roller.
Fit new sweeping roller in reverse order of action.
Ensure that roller is fitted facing in correct direction (see
illustration).
Sweeping roller seen from above
Direction of travel
See Chapter: "Prior to initial start-up".
KSM 750 B Honda
see "Technical Data"
Order no. 6.491-538