Therm 300 - BEHA UNITEST Therm 200 Instruction Manual

Operation Elements
4.2 Therm 300 (please refer to the Figure page 39)
1. Connection socket 1 for thermocouple type K
2. Connection socket for the data cable or the analogue
interface, or the external power supply
3. Connection socket 2 for thermocouple type K
4. LC display
5. Hold key
(SHIFT + SEND) data transfer
6. REL key
7. MIN/MAX key
(SHIFT+ REC)
8. MEM key
(SHIFT + °C/°F) change-over to desired unit display
9. SHIFT key
10. Battery case
11. ON/OFF and backlight key
12. LIMIT ↓ key
(SHIFT+ TIMER) data logger: setting the sampling
LIMIT ↑ key
13
(SHIFT+ TIMER) data logger: setting the sampling
14. T1±T2 key
(SHIFT+ CLEAR) - to clear the memory
38
measurement data memory
relative value
MIN/MAX function
data logger
for individual value memorization
to select the secondary function
(blue print)
instrument rear
alarm function: minimum value
rate
alarm function: maximum value
rate
to select the desired type of
measurement