Display Elements For Therm 200 - BEHA UNITEST Therm 200 Instruction Manual

4.1.1 Display Elements for Therm 200

4a) Display field for
• Additional temperature indication of T1
• Pre-set limit value (MAX value) with alarm function
for T1 or T2
4b) APO = Auto Power Off is activated
= Display for discharged battery
4c) Display field for
• additional temperature indication of T2
• pre-set limit value (Min value) with alarm function
for T1 or T2
4d) HOLD = HOLD function is activated
4e) Selection between units °C or °F
4f) Main display screen
4g) Display of the type of measurement
4h) ALARM if LIMIT is activated,
REL for relative value measurement
4a
4h
4g
The symbols > and < preceding the displayed measu-
rement values indicate an exceeding > or falling below
< of the display or the measurement range.
If - - - - is displayed, the thermocouple is not connec-
ted to the measurement input.
if backlight is activated
Display Elements
4b
4f
4c
4d
4e
37