The instruments Therm 200 and 300 are characterized by
the following functions:
• Large display to simultaneously show three temperature
values
• Two measurement inputs for thermocouples type K
• Single measurement, parallel measurement, or link bet-
ween temperatures
• Minimum and maximum values
• Data hold
• Relative measurement
• Temperature selection between °C and °F
• Backlight
• Limit value monitor
• Automatic power off
• Measurement point illumination (only Therm 200)
Additional functions for Therm 300:
• Data memory for 80 individual values
• Data recorder with selection of measurement rate and
memory for 1000 measurement values
• Analogue output at 1 mV/°C or 0.5 mV/°F
• External voltage supply possible for long term measure-
ments
Scopy of Supply:
1 pc. UNITEST Digital Thermometer Therm 200 or 300
4 pcs. Batteries 1,5 V, IEC LR03
1 pc. Standard flexible wire probe
1 pc. Instruction Manual
2.0 Transport and Storage
Please keep the original packaging for later transport, e.g.
for calibration. Any transport damage due to faulty packag-
ing will be excluded from warranty claims.
In order to avoid instrument damage, it is advised to
remove accumulators when not using the instrument
over a certain time period. However, should the instru-
ment be contaminated by leaking battery cells, you are
kindly requested to return it to the factory for cleaning
and inspection.
Transport and Storage
33