Mowing Zone H - Ryobi Roboyagi Original Instructions Manual

■
Lay the wire 45 cm away from the obstacles.
■
Lay the wire 45 cm away from the perimeter edge.
■
The parallel wires should be laid in a safe location
and free from disturbance.
■
The docking station is placed in Lawn A. To cut
Lawn B, the robotic lawn mower is carried from
Lawn A to B. In Lawn B, run the robotic lawn mower
in Manual Mode for the required time to complete
the task. Once Lawn B is complete, the robotic
lawn mower is carried back to Lawn A. In Lawn A,
place the robotic lawn mower in dock to recharge.
If desired, to continue with Lawn A, set the robotic
lawn mower back to Schedule Mode.

MOWING ZONE H

■
Mowing Zone H has split lawns (Lawn A and Lawn B).
■
The lawns are separate, with an obstacle in
between and no path for the wires to connect Lawn
A and Lawn B.
■
The robotic lawn mower is unable to drive
autonomously between the lawns.
■
To mow each garden, the docking station should
be moved, or a second docking station should be
purchased.
18