Product Features; Bump Sensors; Lift Sensors; Area Sensors - Ryobi Roboyagi Original Instructions Manual

WARNING
Never touch exposed terminals at all times.

PRODUCT FEATURES

The mower is equipped with several sensors that
protect both the mower and the user. Bump sensors,
lift sensors, area sensors, a tilt sensor, and a charging
station sensor are built-in safety features of the mower.
The mower also has a built-in alarm that alerts the user
when the mower is in a fault state and requires the
security PIN to be entered.

BUMP SENSORS

The bump sensors detect when the mower bumps
into an obstacle. When the sensors are activated, the
mower stops and then turns to continue in a different
direction.

LIFT SENSORS

The lift sensors detect when the mower is lifted from
the ground during the operation. When the sensors are
activated, the wheels and blades on the mower stop
immediately.

AREA SENSORS

The area sensors keep the mower within the defi ned
boundary by sensing the proximity of the mower to the
wire.

TILT SENSOR

The tilt sensor detects when the mower is tilted in
relation to the horizontal plane. The sensor is activated
and immediately stops the wheels and blades when the
°
mower is tilted to 25 .

CHARGING DETECTION SENSOR

The charging detection sensor is activated when the
mower is docked at the charging station.

ALARM

The built-in alarm is triggered when the mower is in a
fault state and requires the security PIN to be entered.
The alarm is also set off when the security PIN is not
entered within the required time after the stop button is
pressed or if the mower is lifted off the ground.

SYMBOLS ON THE PRODUCT

Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Operate the disabling device before
working on or lifting the product.
Beware of sharp blades. Blades
continue to rotate after the motor is
turned off.
Beware of thrown or fl ying objects.
Keep all bystanders, especially
children and pets, at least 15 m away
from the area of operation.
Stop the product before performing
any maintenance tasks. The product
should not be ridden on.
SMPS (Switch mode power supply
unit)
SMPS incorporating a short-circuit-
proof safety isolating transformer
Class II tool
Time-lag fuse 3.15 A
Class III electrical protection
Conforms to all regulatory standards
in the country in the EU where the
product is purchased.
EurAsian Conformity Mark
Ukrainian mark of conformity
Recycle raw materials instead of
disposing of as waste. The machine,
accessories, and packaging should
be sorted for environmental-friendly
recycling.
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.

SYMBOLS IN THIS MANUAL

Parts or accessories sold separately
EN
SV
DA
NO
FI
DE
FR
ES
IT
PT
NL
RU
PL
HU
CS
RO
SK
HR
ET
LT
LV
SL
BG
TR
UK
9