Telescopic Handle; General Mowing Tips; Transportation And Storage; Transporting Lithium Batteries - Ryobi RY36LMXSP46 Original Instructions Manual

pack is too warm, allow it to cool down before
resuming operation. If the product still does
not work, recharge the battery.
NOTE: The battery pack LED indicator does
not work if the battery protection feature has
caused the battery pack to stop powering the
product. Release the on-off button or remove
the battery pack from the product and the
battery pack LED indicator will resume normal
function.

TELESCOPIC HANDLE

The product is equipped with a telescopic
handle that can be adjusted for storage and
operation. The telescopic handle must be fully
extended when setting up the product for
NOTE: The product does not function if the
telescopic handle is not fully extended and the
two latches are not in the correct position.
POWER ASSIST LEVER
The product is equipped with a power assist
lever that activates the self-propel function.
Pressing the power assist lever down drives
the product forward without having the user
push it.
NOTE: The power assist feature functions
normally when the product is used on a fl at
surface. The user needs to push the product
forward when using the product on slopes or
uneven surfaces because the power assist
function will be limited and may cause the
wheel to slip.

GENERAL MOWING TIPS

The run time of the battery depends on the
condition, length, and density of the grass.
Adjust the cutting height of the lawn mower to
suit the current condition of the lawn.
Grass Suggested height
conditions adjustment
First Succeeding
pass passes
Very thin /
3
Dry
Thin / Dry 4
Medium /
5
Dense
* battery: BPL3650D
4 | English
use.
Coverage
(maximum)
2 800 m *
2
3 → 2
620 m *
2
4 → 3
400 m *
2
■
For best performance, always cut off one-
third or less of the total height of the grass.
■
When cutting long grass, reduce walking
speed to allow for more effective cutting
and a proper discharge of the clippings.
■
Do not cut wet grass; it will stick to the
underside of the deck and prevent proper
collection or discharge of grass clippings.
■
New or thick grass may require a higher
cutting height.
■
To collect the grass cuttings for disposal,
remove the mulching plug and install the
grass catcher, making sure that the top flap
is properly closed. Empty the grass catcher
regularly; otherwise, the discharge chute
will become blocked with grass cuttings.
■
If you are making a light cut and wish for
the grass cuttings to remain on the lawn,
install the mulching plug and close the top
flap to cover the discharge opening. It is
not necessary to install the grass catcher
in this case.
■
The product is designed to operate and cut
most effectively when moving forwards.
■
A higher cutting height extends the run
time of the battery.

TRANSPORTATION AND STORAGE

■
Turn off the product, and remove the
isolator key and the battery. Make sure that
all moving parts have come to a complete
stop. Allow the product to cool down before
storing or transporting.
■
Clean all foreign materials from the product.
Store the product in a cool, dry, and well-
ventilated place
to children. Keep the product away
from corrosive agents, such as garden
chemicals and de-icing salts. Do not store
the product outdoors.
■
For transportation in vehicles, remove
the isolator key, and secure the product
against movement or falling to prevent
injury to persons or damage to the product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local
and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
that is inaccessible