Subscribe to Our Youtube Channel
Related Manuals for Ryobi EasyEdge RLT5030SG
Summary of Contents for Ryobi EasyEdge RLT5030SG
- Page 1 RLT5030SG EasyEdge™ ELECTRIC LINE TRIMMER OPERATOR’S MANUAL Important! It is essential that you read the instructions in this manual before assembling and operating this machine. Subject to technical modifications.
- Page 2 Yo u r l i n e t r i m m e r h a s b e e n e n g i n e e r e d a n d this product. manufactured to Ryobi’s high standard for dependability, n Keep all bystanders, especially children and pets, at ease of operation, and operator safety.
- Page 3 Any part that is damaged which is on walls or rocks. should be properly repaired or replaced by a Ryobi n Always use your trimmer in an upright position. authorised service centre.
- Page 4 ENGLISH n Keep in mind that the operator or user is responsible – before clearing a blockage; for accidents or hazards occurring to other people or – before checking, cleaning or working on the their property. machine; – after striking a foreign object; PREPARATION –...
- Page 5 Weight(without cord) ..........3.1kg Figure 5 ACCESSORY PART NUMBERS 15. Handle adjusting knob Genuine replacement spool and line is available from your Ryobi dealer. Figure 6 The part number for replacement line and spool is: 3. Cord retainer LTA062 4. Power cord...
-
Page 6: Grass Cutting Tips
Every time you are starting the EasyEdge™ line If the cable is damaged, cut or scarred in any trimmer, the automatic feed line spool also releases way, contact your local Ryobi service centre and approximately one centimetre of line. do not use the product. -
Page 7: Easyedge Function
ENGLISH Never pass the line trimmer over the electric cable the eyelets (item 20). while the line trimmer is running; make sure the cable Put the spool cover into position and push in until the is always in safe position behind your back. spool cover lock buttons clicked into the designated cut outs and the spool is secured in place. - Page 8 ENGLISH TROUBLESHOOTING 1. Lubricate with a silicone spray. 1. Line is welded to itself. 2. Install more line (Refer to “Replacing the Cutting Line will not advance 2. Not enough line on spool. Line” earlier in this manual). when you restart the 3.
- Page 9 Subject to the guarantee condition below, this Ryobi guarantee does not cover damage, malfunction or tool (hereinafter called “the product”) is guaranteed by failure resulting from misuse, neglect, abuse, or used TECHTRONIC INDUSTRIES AUSTRALIA for a purpose for which it was not designed or is not LIMITED (hereinafter called “the Company”) to be free...
Need help?
Do you have a question about the EasyEdge RLT5030SG and is the answer not in the manual?
Questions and answers
I hit a steel wire and it has wrapped around lower part of spool. How to get spool off
To remove the spool from a Ryobi RLT5030SG after steel wire has wrapped around it:
1. Switch off and disconnect the trimmer from the mains power supply.
2. Press in both spool cover lock buttons (item 18).
3. Remove the spool cover.
4. Carefully lift out the spool to remove the wire.
Make sure the machine is unplugged before performing any maintenance.
This answer is automatically generated
Speed got slower
The speed of the Ryobi RLT5030SG may slow down when the cutting line is worn or broken. When this happens, the engine runs faster than normal, signaling the need to advance the line to maintain optimal cutting performance.
This answer is automatically generated
Where is figure14A