Technical Data - Hilti TE 30-A36 Operating Instructions Manual

4. Technical data

Right of technical changes reserved.
Power tool
Rated voltage
Weight in accordance with EPTA procedure
01/2003
Dimensions (L x W x H)
Drilling speed without hammering
Hammer drilling speed
Single impact energy in accordance with EPTA pro-
cedure 05/2009
Battery
Rated voltage
Capacity
Energy capacity
Weight
Type of cell
Temperature monitoring
Deep discharge protection
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a
standardized test given in EN 60745 and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure. The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working
period. An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to protect the operator from
the effects of vibration such as: maintaining the tool and the accessories, keeping hands warm, organization
of work patterns.
Noise and vibration information (measured in accordance with EN 60745):
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level
Uncertainty for the given sound level as per
EN 60745
Additional information in accordance with EN 60745
TE 30-A triaxial vibration values
Hammer drilling in concrete, a
Chiseling, a
h, HD
Uncertainty (K)
TE 30‑A
36 V
5.5 kg
423 mm x 111 mm x 231 mm
853/min
853/min
3.6 J
B 36/6.0 Li‑Ion
36 V
6 Ah
216 Wh
1.8 kg
Li‑ion
NTC
Yes
105 dB (A)
94 dB (A)
3 dB (A)
measured in accordance with EN 60745-2-6
11 m/s²
h, HD
9 m/s²
1.5 m/s²
en
5