Parental Controls - TP-Link TL-WR841N User Manual

Hide thumbs Also See for TL-WR841N:

User manual (184 pages)

Quick installation manual (30 pages)

Setup manual (17 pages)

Table Of Contents

Table of Contents

Chapter 4

•

Web Management Port

service port 80. This router's default remote management web port number is 80.

For higher security, you can change the remote management web port to a custom

port by entering a number between 1 and 65534 but do not use the number of any

common service port.

•

Remote Management IP Address

your router via a remote device. This function is disabled when the IP address is set

to the default value of 0.0.0.0. To enable this function, change 0.0.0.0 to a valid IP

address. If it is set to 255.255.255.255, then all the remote devices can access the

router from the Internet.

Note:

• To access the router, enter your router's WAN IP address in your browser's address bar, followed by a colon and the

custom port number. For example, if your router's WAN address is 202.96.12.8, and the port number used is 8080,

please enter http://202.96.12.8:8080 in your browser. Later, you may be asked for the router's password. After

successfully entering the username and password, you will be able to access the router's web management page.

• Be sure to change the router's default password for security purposes.

4. 9.

Parental Controls allows you to block inappropriate and malicious websites, and control

access to specific websites at specific time for your children's devices.

For example, you want the children's PC with the MAC address 00-11-22-33-44-AA can

access www.tp-link.com on Saturday only while the parent PC with the MAC address

00-11-22-33-44-BB is without any restriction.

1. Visit http://tplinkwifi.net, and log in with the username and password you set for

the router.

2. Go to

3. Click

Schedule_1,

4. Go to

Downloaded from

ManualsNet.com

- Web browser access normally uses the standard HTTP