TP-Link TL-WR841N User Manual page 25

Chapter 4
•
•
•
Note:
• Only when you have configured the system time on the
connecting function take effect.
• Sometimes the connection cannot be terminated although you have specified the
applications are visiting the Internet continually in the background.
If you want to do some advanced configurations, please click Advanced.
• MTU Size
the default MTU size unless required by your ISP.
• Service Name/AC Name
should not be configured unless you are sure it is necessary for your ISP. In most cases,
leaving these fields blank will work.
• ISP Specified IP Address
router, please select
by your ISP in dotted-decimal notation.
Downloaded from ManualsNet.com
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
Connect Automatically
when it is down.
Time-based Connecting
from the start time to the end time (both are in HH:MM format).
Connect Manually - You can click
immediately. This mode also supports the
on Demand mode. The Internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the Internet again.
- The default MTU size is 1480 bytes. It is not recommended that you change
- The service name and AC (Access Concentrator) name
- If your ISP does not automatically assign IP addresses to the
Use IP address specified by ISP
search engine
- The connection can be re-established automatically
- The connection will only be established in the period
Connect/Disconnect
Max Idle Time
System Tools >
and enter the IP address provided
Configure
to connect/disconnect
function as Connect
Time Settings page, will the time-based
Max Idle Time because some
21