TP-Link TL-WR841N User Manual page 24

Chapter 4
• Subnet Mask
ISP. Normally 255.255.255.0 is used as the subnet mask.
• Default Gateway
by your ISP.
• MTU Size
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
• Primary/Secondary DNS
decimal notation provided by your ISP.
PPPoE/Russia PPPoE
If your ISP provides PPPoE connection, select
• User Name/Password
fields are case-sensitive.
• Confirm Password
password you entered is correct.
• Secondary Connection
an extra connection type, select
connection.
• WAN Connection Mode
•
Downloaded from ManualsNet.com
- Enter the subnet mask in dotted-decimal notation provided by your
- Enter the gateway IP address in dotted-decimal notation provided
- The normal MTU (Maximum Transmission Unit) value for most Ethernet
- (Optional) Enter one or two DNS addresses in dotted-
- Enter the user name and password provided by your ISP. These
- Enter the Password provided by your ISP again to ensure the
- It's available only for PPPoE connection. If your ISP provides
Connect on Demand - In this mode, the Internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the Internet again. If you want to keep
your Internet connection active all the time, please enter 0 in the
search engine
PPPoE/Russia
Dynamic IP or Static IP
Configure
PPPoE.
to activate the secondary
Max Idle Time
20