HP iPAQ h6315 Networking Manual page 51

Deleting a network
To delete a wireless network, perform the following steps:
1. Turn on the WLAN.
2. Tap the Connectivity icon.
3. In the Connectivity pop-up box, tap Settings > Connections tab > Connections icon > Advanced
tab > Network Card > Wireless tab.
4. In the Configure Wireless Networks box, tap the name of the desired network to delete, and hold
down the stylus for a few seconds until the Connect/Remove Settings drop-down box appears.
Tap Remove Settings.
Monitoring signal strength and status
To view the signal strength between your HP iPAQ and Wi-Fi access point connections:
1. Tap the Connectivity icon in the navigation bar.
2. When the drop-down Connectivity box displays, you are able to view the name (SSID) of the
network the HP iPAQ is connected to and an icon displaying the signal strength.
Note: The signal strength icon will not be displayed if a connection is not present.
Figure 11. Signal strength indicator
Network settings
Locating an IP address
To find the IP address the wireless network is using:
1. Be sure Wi-Fi is powered on.
2. Connect to the appropriate network.
3. From the Start menu, tap Settings > Connections tab > Connections icon > Advanced tab >
Network Card button > Network Adapters tab.
4. Tap the appropriate adapter to modify the settings. The IP address appears in the IP Address box.
51