HP iPAQ h6315 Networking Manual page 45

To delete an existing connection:
1. Tap the Connectivity icon > Settings > Tasks tab.
2. On the Connections screen, tap Manage existing connections.
3. Locate the connection in the Name box and tap and hold the stylus in place for a few seconds
until the Delete/Connect box appears.
4. Tap Delete to delete the connection.
To establish a WLAN connection using the modem connection just added or changed:
1. Tap the Connectivity icon > Settings > Tasks tab.
2. On the Connections screen, tap Manage existing connections.
3. Locate the connection in the Name box and tap and hold the stylus in place for a few seconds
until the Delete/Connect box appears.
4. Tap Connect to complete the connection.
VPN server connections
Creating a VPN connection
A VPN connection provides a secure connection to servers, such as a corporate network, via the
Internet. If the name, password, domain name, TCP/IP settings, and host name or IP address of the
VPN server are not known, then contact the network administrator. Perform the following steps to set
up a VPN server connection:
Note: At this point, you may use the New Connection wizard to set up a VPN connection, or continue with the steps below.
The New Connection wizard provides online Help and is available at any time in the VPN server connection setup by tapping
the keyboard question mark (?).
1. Turn on the WLAN.
2. On the Today screen, tap Start, Settings, the Connections tab, the Connections icon, and the Tasks
tab.
3. Under My Work Network, tap Add a new VPN server connection.
4. On the Make New Connection screen, enter a name for the connection in the Name box. Enter
the appropriate information provided by the network administrator in the Host name/IP box.
5. Tap the appropriate VPN type received from the network administrator and then tap Next.
6. On VPN connection screen, enter a user name, password, and domain provided by the network
administrator.
7. Tap Finish.
Note: For online Help for any screen in the New Connection wizard or while changing settings, tap the question mark (?).
Changing a VPN connection
Perform the following steps to make changes to VPN server connections on an HP iPAQ Pocket PC
h5500 series handheld device:
1. Turn on the WLAN.
2. On the Today screen, tap Start, Settings, the Connections tab, the Connections icon, and then tap
the Tasks tab.
3. On the Connections screen, under My Work Network, tap Edit my VPN server.
4. Tap the desired VPN connection to change and then tap Edit.
5. On the VPN connection screen, enter a name for the connection in the Name box (for example, a
company name).
6. Still on the VPN connection screen, enter the VPN server name or IP address in the Host name/IP
box.
7. Next to VPN type tap the authentication type desired (IPSec/L2TP or PPTP). If unsure which option
to choose, contact the network administrator.
45