HP iPAQ h6315 Networking Manual page 12

To change server settings:
1. Contact your ISP or network administrator to determine which name resolution to use, obtain the
specific server address, and determine whether alternate addresses are available.
Note: An alternate address may enable you to connect when the primary server is unavailable.
2. Be sure the Wi-Fi is powered on.
3. Tap the iPAQ Wireless icon.
4. From the iPAQ Wireless screen, tap Settings > Network Adapters tab.
5. In the My network card connects to list box, tap either The Internet or Work.
Note: If you are connecting to your ISP at home, tap The Internet. If you are connecting to a private network such as a
corporate network at work, you should tap Work.
6. In the Tap an adapter to modify settings box, tap HP iPAQ Wi-Fi Adapter.
7. Tap the Name Servers tab and enter the requested information.
8. Tap OK to save your settings.
Changing ISP settings
If you are connected to your ISP or private network during synchronization, your HP iPAQ should
download proper proxy settings from your computer. If these settings are not on your computer or
need to be changed, you will need to set them up manually. To set up proxy server settings:
1. Contact your ISP or network administrator for the proxy server name, server type, port, type of
Socks protocol used, and your user name and password.
2. Be sure Wi-Fi is powered on.
3. Tap the Connectivity icon in the Navigation bar, and then Settings > Tasks tab.
4. Under My Work Network, tap Set up my proxy server > Proxy Settings tab.
5. Tap the This network connects to the Internet and This network uses a proxy server to connect to
the Internet checkboxes.
6. In the Proxy server box, enter the proxy server name.
7. If you need to change port number or proxy server type settings, tap the Advanced button and
change the desired settings.
8. Tap OK.
VPN server connections
Creating a VPN connection
A VPN connection enables you to securely connect to servers, such as a corporate network, via the
Internet. To set up a VPN server connection:
1. Contact your network administrator for your user name, password, domain name, TCP/IP
settings, and host name or IP address of the VPN server.
2. Tap the Connectivity icon in the Navigation bar, then tap Settings > Tasks tab on the Connections
screen.
3. Under My Work Network, tap Add a new VPN server connection.
4. Follow the instructions on the Make New Connection screen.
Changing a VPN connection
To change/edit a VPN server connection:
1. Tap the Connectivity icon in the Navigation bar, and then Settings > Tasks tab on the Connections
screen.
2. Under My Work Network, tap Manage existing connections > VPN tab.
12