HP iPAQ h6315 Networking Manual page 31

Network settings
Locating an IP address
Perform the following steps to identify the IP address of a wireless network:
1. Turn on the WLAN.
2. Establish a WLAN connection.
3. On the Today screen, tap Start > iPAQ Wireless > iPAQ WLAN.
4. Select the profile for the connection for which the IP address is desired from the Profile drop-down
list.
5. Tap the Status button.
6. Tap OK to close the window.
Changing TCP/IP settings
Note: Most ISPs and private networks use dynamically assigned IP addresses. Unless the ISP or private network does not use
dynamically assigned IP addresses, the TCP/IP settings require no change. If unsure whether the TCP/IP settings use
dynamically assigned IP addresses then contact the network administrator.
Perform the following steps to change the TCP/IP settings on the HP iPAQ Pocket PC h5400 series
with Microsoft Pocket PC 2002 handheld device:
1. Turn on the WLAN.
2. On the Today screen, tap Start > iPAQ Wireless > iPAQ WLAN.
3. Select the desired profile from the Profile drop-down list.
4. Tap the Edit button.
5. Tap Next.
6. Select Use specific IP address
7. Enter the appropriate information.
8. Tap Next.
9. Tap Finish.
10. Tap OK to close the window.
Changing DNS and WINS settings
Servers that require an assigned IP address may also require a way to map computer names to IP
addresses. The HP iPAQ Pocket PC h5400 series handheld devices support two name resolution
options:
• DNS
• WINS
31