HP iPAQ h6315 Networking Manual page 38

To delete an existing connection:
1. On the Connections screen, tap Manage existing connections.
2. Locate the connection in the Name box and tap the name, holding the stylus in place for a couple
of seconds until a Delete/Connect box appears. Tap Delete to delete the connection.
To establish a WLAN connection using the modem connection just added or changed:
1. On the Connections screen, tap Manage existing connections.
2. Locate the connection in the Name box and tap the name, holding the stylus in place for a couple
of seconds until the Delete/Connect box appears. Tap Connect to complete the connection.
VPN server connections
Creating a VPN connection
A VPN connection provides a secure connection to servers, such as a corporate network, via the
Internet. If the name, password, domain name, TCP/IP settings, and host name or IP address of the
VPN server are not known, then contact the network administrator. Perform the following steps to set
up a VPN server connection:
Note: At this point, you may use the New Connection wizard to set up a VPN connection, or continue with the steps below.
The New Connection wizard provides online Help and is available at any time in the VPN server connection setup by tapping
the keyboard question mark (?).
1. Turn on the WLAN.
2. On the Today screen, tap Start > Settings > Connections tab > Connections > Tasks tab.
3. Under My Work Network, tap Add a new VPN server connection.
4. On the Make New Connection screen, enter a name for the connection in the Name box. Enter
the appropriate information provided by the network administrator in the Host name/IP box.
5. Tap the appropriate VPN type received from the network administrator and then tap Next.
6. On the My VPN screen, tap either A certificate on this device or A pre-shared key. If you tapped
A pre-shared key, enter the key number in the box.
7. On the My VPN screen, enter a user name, password, and domain provided by the network
administrator.
8. Tap Finish.
9. Follow the instructions in the New Connection wizard.
Note: For online Help for any screen in the New Connection wizard or while changing settings, tap the question mark (?).
Changing a VPN connection
Perform the following steps to make changes to VPN server connections on an HP iPAQ Pocket PC
h5400 series handheld device:
1. Turn on the WLAN.
2. On the Today screen, tap Start > Settings > Connections tab > Connections icon > Tasks tab.
3. On the Connections screen under My Work Network, tap Manage existing connections.
4. Tap the VPN tab.
5. Tap the desired VPN connection to change and then tap Edit.
6. On the My VPN screen, enter a name for the connection in the Name box (for example, a
company name).
7. Still on the My VPN screen, enter the VPN server name or IP address in the Host name/IP box.
8. Next to VPN type tap the authentication type desired (IPSec/L2TP or PPTP). If unsure which option
to choose, contact the network administrator.
9. Tap Next.
10. If you chose IPSec/L2TP in step 8, then tap the appropriate authentication type. If you selected A
pre-shared key, then enter the key provided by the network administrator and tap Next.
38