Product Assembly - KitchenAid Pro 600 KEC50C Series Manual

PRODUCT ASSEMBLY

1
Turn the speed control to "0" (OFF).
Unplug the Stand Mixer.
3
Spring Latch
To attach the Bowl: Fit the bowl supports
over locating pins and press down on back
of the bowl until bowl pin snaps into spring
latch.
5
To raise the Bowl: Rotate the bowl lift
lever to the straight up position. The bowl
must always be in the raised position when
mixing.
W11395148A.indb 7
Locating Pin
2
Place bowl lift lever in down position.
4
To attach the accessory: Slip the
accessory onto the shaft. Turn to hook it
over the pin on the shaft.
IMPORTANT: If the bowl is not securely
snapped into place, it will be unstable and
wobble during use.
7
10/3/2019 4:32:05 PM