Electrical Requirements - KitchenAid Pro 600 KEC50C Series Manual

PRODUCT SAFETY
12. Do not let the cord hang over edge of table or counter.
13. Remove flat beater, wire whip, or dough hook from Stand Mixer before washing.
14. To avoid product damage, do not use the Stand Mixer bowls in areas of high
heat such as an oven, microwave, or on a stovetop.
15. Do not use the Stand Mixer on or next to an electric or gas oven, or put it inside
of a warm oven.
16. Do not use the Stand Mixer for anything other than its intended function as
specified in this manual.
17. Do not use toxic products (alcohol, ammonia, stain removers, etc.) or steel
sponges to clean the Stand Mixer. These products may damage the Stand Mixer
or leave undesirable odors.
18. Refer to the "Care and Cleaning" section for instructions on cleaning the
surfaces in contact with food.
19. This appliance is intended to be used in household and similar applications such
as:
- staff kitchen areas in shops, offices or other working environments;
- farmhouses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
SAVE THESE INSTRUCTIONS

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
4
W11395148A.indb 4
KEC97A3S Series, KEC50CVP Series
Volts: 220 V
Hertz: 60 Hz
Wattage: 500 W
KEC97A3A Series, KEC50CVA Series
Volts: 127 V
Hertz: 60 Hz
Wattage: 500 W
NOTE: Use an appropriate outlet to plug
in your Stand Mixer. If the plug does
not fit in the outlet, contact a qualified
electrician. Do not modify the plug in any
way. Do not use adapters or T's.
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or service technician
install an outlet near the appliance.
10/3/2019 4:32:03 PM