Troubleshooting Guide - KitchenAid Pro 600 KEC50C Series Manual

TROUBLESHOOTING GUIDE

Plug into an earthed outlet.
Do not remove an earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, re,
or electrical shock.
Problem
If Stand Mixer warms up
during use:
If Stand Mixer emits a pungent
odor during initial use:
If the flat beater hits the bowl:
The speed control lever does
not move smoothly or easily:
If your Stand Mixer should fail
to operate, please check the
following:
Note:
If the problem cannot be corrected, See the "Warranty and Service" section.
Do not return the Stand Mixer to the retailer; retailers do not provide service.
W11395148A.indb 13
WARNING
Electrical Shock Hazard
Under heavy loads with extended mixing time periods, you
may not be able to comfortably touch the top of the Stand
Mixer. This is normal.
This is normal. This is common with electric motors.
Stop the Stand Mixer. See the "Beater to bowl clearance"
section and adjust the beater to bowl clearance.
To move the speed control lever with ease, lift slightly up as
you move it across the settings in either direction.
Is the Stand Mixer plugged in?
Is the fuse in the circuit to the Stand Mixer in working
order? If you have a circuit breaker box, be sure the circuit
is closed.
Turn off the Stand Mixer for 10-15 seconds, then turn it
back on. If the Stand Mixer still does not start, allow it to
cool for 30 minutes before turning it back on.
Solution
10/3/2019 4:32:07 PM
13