Charging The Ip Phone's Battery - Cisco Lynksys WIP300 User Manual

Wireless-G IP Phone

Charging the IP Phone's Battery

1. Connect the small end of the included AC power adapter to the USB mini-B port on the bottom of the IP Phone.
USB mini-B port
2. Plug the other end of the adapter into a standard electrical outlet.
You see a charging indicator on the LCD screen
Note: Allow the battery to charge for eight hours before initial use.
When the Battery charging indicator remains solid blue, the battery is fully charged and ready for use.
When the battery is fully charged, proceed to "Setting up the Wireless-G IP Phone" on page 9.
10
Chapter 3: Installing and Using the Wireless-G IP Phone
Charging the IP Phone's Battery