Download Print this page

Charging The Phone And The Battery - Cisco 7920 Getting Started

Unified wireless ip phone
Hide thumbs Also See for 7920:

Advertisement

Figure 1
Installing and Removing the Battery
Locking catch—Press to release the battery.
1
Catches—Insert these into the slots near the bottom of the phone at battery installation.
2
Metal contact—Match the contact on the battery to the contact on the phone.
3

Charging the Phone and the Battery

The Cisco Unified Wireless IP Phone 7920 is powered by a rechargeable battery. To charge the battery
when it is installed in the phone, follow these steps:
1. Connect the cable from the power supply to the base of the phone.
2. Connect the power supply to an AC wall outlet as shown in Figure 2.
Cisco Unified Wireless IP Phone 7920 for Cisco CallManger Express 3.2 and Later
1
3
2
2
Getting Started
13

Advertisement

loading