Nikon Super CoolScan 9000ED Repair Manual page 12

AF carriage unit
・ Remove the light-shielding cover (#110) by taking out 4 screws (#194).
・ Remove the CCD holder (#108) by taking out 3 screws (#193). The adjustment washers (#109A-G) come off accordingly.
・ Remove the CCD unit (#542) from #108 by taking out 2 screws (#181).
・ Remove the retaining plate (#B107) by taking out the screw (#192).
・ Remove the lens unit (#B91) by lifting it in the direction indicated by the arrow.
＊ Note:
Whenever the lens unit (#B91) and the CCD holder (#108) and the CCD unit (#542) are disassembled or replaced, the CCD
adjustment (ref. "Adjustment" chapter) is necessary.
#192
#B107
#B107
#110
#B91
#B091
- Ｄ7 ･
#194
x4
#193
x3
#109A
#109B
#109C
#109D
#106
#109E
-
LS-9000
VRA51701-R.3607.A
#181
x2
#542
#108