* Log
Select "Run" on the main menu, then choose "Log", "Load" and "Scanner". The log data is automatically indicated.
When "Run", "Log", "Load" and "File" are selected, the saved log data is called up.
When "Log" and "Clear" are selected, the log data in the flash memory on the main PCB is cleared.
Clear - - -The log data in the flash memory on the main PCB is cleared/deleted.
Write- - -The saved log data is written in the flash memory.
Save - - -The log data is saved.
- A49 ・
-
LS-9000
VRA51701-R.3607.A