Main Pcb / Power Unit A18 - Nikon Super CoolScan 9000ED Repair Manual

Main PCB / Power unit
・ Attach the power base (#35) with 4 screws (#192).
・ Attach the insulating sheet (#50) and the power PCB (#522) with 4 screws (#192) and #197.
・ Connect each connector (#560, #509, #510, #517, #516, and #551), and attach the main PCB (#541) with 6 screws (#192).
・ Attach the power SW (#42) and hook the spring (#45).
#551
Light blue side
#541
#560
＊ Note: Light blue side (cf. backside is white) for contacts of #551 should face the
IEEE connector.
IEEE connector
#192
x6
#516
#517
#510
#509
#35
#551
#43
Adhesive: Super X
- A18 ･
#192
x4
#522
A
#50
#192
x4
B
#45
B
-
LS-9000
VRA51701-R.3607.A
#197
A
#42