Base Unit A17 - Nikon Super CoolScan 9000ED Repair Manual

VRA51701-R.3607.A
Base unit
・ Attach the base unit (#121) on the bottom plate (#34) with 4 screws (#197).
・ Attach the illumination unit on the base unit with 4 screws (#192).
・ Connect the relay FPC connector to the connector of the illumination PCB.
・ Attach the PCB-support plate (#47) with 6 screws (#192).
・ Attach 4 foot rubber (#48) on the bottom plate (#34).
#192
x2
#197
x4
#192
x2
#121
#47
#34
#48
x4
#192
x6
- A17 ･ -
LS-9000