Nikon Super CoolScan 9000ED Repair Manual page 34

・ Assemble the eject button (#44) and attach the eject PCB (#544) with 2 screws (#194).
・ Connect the connector of #557 to #544, and also connect the LED to #B331, and arrange the harness of #557.
#194×2
・ Attach the front panel with 4 screws (#192).
・ Connect the harness of the connector #557 (that is connected from the front panel) to the A-part of the main PCB, while
arranging the harness of the connector.
A
＊ Note: In case of necessity of the CCD adjustment, before attaching the cover, etc as shown on the next page, make an ad-
justment on Page A23 - A27.
#544
#557
Note: Arrange the #557 harness.
Body
- A21 ･
LS-9000
#B331
-
VRA51701-R.3607.A
LED
Front panel
#192×4