Resetting Lockout - Omron F3SJ-A P Series User Manual

Unblocked
Unblocked
/Blocked
Blocked
ON
Safety output
OFF
ON
Auxiliary output 1
OFF
Ton: Response time of safety output's OFF to ON, Toff: Response time of safety output's ON to OFF
See p.14 for response time

Resetting Lockout

When the cause of the lockout is removed, the lockout condition can be released by using either of the
following methods.
•Cycle the power back ON
•Reset input (except for lockout due to a communication error or a wiring error)
For manual reset, apply 9 to 24V to the reset input line for 100ms or longer, and then open the switch
to apply a 0 to 1.5V signal or open circuit (pin 4/yellow).
For auto reset, set the reset line open or to 0 to 1.5V for 100ms or longer, and then apply 9 to 24V
again (pin 4/yellow).
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Toff
Toff x2 or less
System Configuration and Functions
Ton
Toff x2 or less
E
F3SJ-A
29
User's Manual