Omron F3SJ-A P Series User Manual page 27

No. Indicators
8 ON-state indicator (ON)
9 Muting error indicator
(MUTING ERR)
10 Test indicator (TEST)
*1. Indication patterns and incident light levels of the incident light level indicator
ON OFF
Operation is possible with incident light level of 100% or more, but to ensure stability, operate when all incident light level
indicators
*2. Indication patterns of error mode indicator and causes of errors
OFF Blinking ON
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
For basic system
Turns ON when safety outputs are ON.
ON Not used
Blinking Not used
ON Not used
Blinking Not used
Incident light level
170% or higher of safety output ON level
From 130 to 170% of safety output ON level
From 100 to 130% of safety output ON level
From 75 to 100% of safety output ON level
From 50 to 75% of safety output ON level
Less than 50% of safety output ON level
Cause of error
Incorrect wiring or breakage of interlock selection input line or reset input
line.
Relay is welded or recovery time is too long. Incorrect wiring or breakage of
external device monitoring line.
Incorrect wiring of safety output 1 or 2. Failure of safety output circuit.
Incorrect wiring or breakage of series-connection cable.
Effect of noise. F3SJ Failure of internal circuit.
Breakage, incorrect wiring of communication line, disconnection of series
connection cable, influence of noise, or other errors.
Mutual interference or disturbance light.
Emitter and receiver have different F3SJ model names or number of series
connections.
Muting wiring failure.
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles
End cap is not attached. Failure of internal circuit of F3SJ.
Overview and Specifications
Description
For muting system
Turns ON when a muting error occurs.
Not used
Not used
Blinks when external test is being
performed.
E
F3SJ-A
9
User's Manual