HP Visualize c100 Install Manual page 6

RavenUpgrade.FB 4 Mon Jul 15 11:43:09 1996
WARNING:
CAUTION:
Figure 1
Preparing Your Workstation
5 Unplug the power cord of the system unit, the monitor, and any peripheral devic-
es from ac wall outlets.
6 Unplug the power cord from the back of the system unit.
To avoid electrical shock, make sure you unplug the power cable from
the wall outlet and the system unit before proceeding any further.
The internal components of your workstation are susceptible to mechanical and
electrostatic shock. To prevent such damage from occurring, observe the following
precautions during the installation procedure.
•
Stand on a static-free mat
•
Wear a static-grounding wrist strap to ensure that any accumulated electrostatic charge
discharges from your body to ground. Attach the static-grounding wrist strap by fol-
lowing the instructions on the package that contains the strap. Be sure to attach one
end of the strap to the system chassis.
7 Remove the system unit from the floor stand, as shown in Figure 1.
Removing the Floor Stand
4