Introduction And Site Preparation Checklist; 1.1 Scope And Purpose Of This Guide; Temescal Contact Information - ferrotec Temescal FC-4400 Facility And Installation Manual

1

Introduction and Site Preparation Checklist

1.1 Scope and Purpose of this Guide

1.1.1 Overview of F&I Guide
The purpose of this Facilities and Installation (F & I) Guide is to provide facility
requirements and installation guidelines for your Temescal System. This Guide gives
information for preparing your site to receive and install your new equipment. Topics
covered, by section, are:
Section 1: Introduction
Section 2: Facility Requirements
Section 3: Unpacking and Installation
1.1.2 In This Section
This remainder of this section contains:

1.2 Temescal Contact Information

1.3 General Safety Information
1.4 Site Preparation Checklist
1.2 Temescal Contact Information
If you have any questions or concerns, or if you need assistance, contact us at one of the
following telephone numbers:
 To schedule an installation or a field service visit, call:
Customer Support Coordinator
 To speak with a technician, call:
Temescal Technical Support and Assistance 1-800-522-1215, ext. 2891
 To order replacement or spare parts, call:
Temescal Customer Service, Parts
0101-9030-0, Rev. D
1-800-522-1215, ext. 2817 (voice)
1-925 449-4096 (fax)
1-800-522-1215, ext. 2818 or 2819
1-1 FC-4400 F & I Guide