Table of Contents
Advertisement
No.
Procedure
1
Turn on the power, and confirm items pointed
out.
2
Insert RAM disc.
3
Enter the EE (TU IN / AV IN - AV OUT) mode.
4
Perform auto recording and playback for one
minute using the RAM disc.
5
If a problem is caused by a VCD, DVD-R, DVD-
Video, Audio-CD, or MP3, playback the test disc.
6
Models with SD Card Slot or DV Input Jack: In
case of that the trouble is caused by SD card or
DV terminal.
7
After checking and making repairs, upgrade the
firmware to the latest version.
8
Transfer [9][9] in the service mode setting, and
initialize the service settings (return various
settings and error information to their default
values. The laser time is not included in this
initialization).
Use the following checklist to establish the judgement criteria for the picture and sound.
Item to Check
Items pointed out should reappear.
The Panasonic RAM disc should be recognized.
No abnormality should be seen in the picture,
sound or operation.
No abnormality should be seen in the picture,
sound or operation.
*Panasonic DVD-RAM disc should be used when
recording and playback.
No abnormality should be seen in the picture,
sound or operation.
Models with SD Card Slot or DV Input Jack;
1) SD card: Check to be able to display and copy
the picture.
2) DV terminal: Check to be able to record from
DVC.
Make sure that [FIRM_SUCCESS] appears in the
FL displays.
*[UNSUPPORT] display means the unit is already
updated to newest same version. Then version
up is not necessary.
Make sure that [CLR] appears in the FL display.
After checking it, turn the power off.
Advertisement
Table of Contents
