Panasonic DMR-ES45VP Service Manual page 31

Item
Mode name Description
RTSC Return in L1 input signal is encoded (XP),
XP decoded (XP) and output
decoded signal to external
(A & V)
without DISC recording and DISC
playback.
I/P Switch Switch Interlace and Progressive
in EE mode.
*Initial setting is "Interlace".
*This command is effective
during executing "White Picture
Output", "Magenta Picture
Output" and "RTSC Return in XP
(A & V)" modes.
Audio Mute Check whether mute is applied
(XTMUTE) normally by the timer
microprocessor.
Audio Mute Check whether mute is applied
(XDMUTE) normally by the Digital P.C.B..
FL display
(Remote controller key)
Initial mode: EE2/ Interlace Press [1] [3] in service
/ XP/ Audio 48kHz mode.
Switch Interlace/ Press [1] [4] in RTSC
Progressive Return XP mode.
*I/P are switched
alternately.
Audio 44.1 kHz/ 48 kHz Press [2] [4] in RTSC
Switch Return XP mode.
*48 kHz / 44.1 kHz are
switched alternately.
Initial mode is Interlace Press [1] [4] in I/P Switch
mode.
*I/P are switched
alternately.
Switch Interlace/
Progressive
Press [2] [1] in service
mode.
Press [2] [2] in service
mode.
Key operation