Table of Contents
Advertisement
Error
Diagnosis contents
Code
F09
Serial Communication
Please confirm Serial
Error between VHS
Communication terminal of
Microprocessor and
Microprocessor.
Timer Microprocessor.
NOTE:
If F09 appears just after updating
Firmware, pull off and insert AC
plug, then it will disappear.
F34
Initialization error
When initialization error is
when main
detected after starting up main
microprocessor is
microprocessor for program
started up for program
recording, the power is turned
recording
off automatically.
The event is saved in memory.
F58
Drive hardware error
When drive unit error is detected,
the event is saved in memory.
F60
DVD module has not
Defect of Digital P.C.B.
been started.
Mode: No change
Unsupported disc
*An unsupported format disc
UNSUPPORT
error
was played, although the drive
starts normally.
*The data format is not
supported, although the media
type is supported.
*Exceptionally in case of the disc
is dirty.
Description
Monitor
Display
No display
No display
No display
No display
"This disc is
incompatible."
Automatic FL display
No display
No display
Display for 5 seconds.
Advertisement
Table of Contents
